Updates after longer usage.

diff --git a/authors.txt b/authors.txt
index dc171a3..94fe182 100644 (file)
--- a/authors.txt
+++ b/authors.txt
@@ -16,7 +16,8 @@ akatsifo=Asterios Katsifodimos <asteriosk@cs.ucy.ac.cy>
 akrenek=Aleš Křenek <ljocha@ics.muni.cz>
 akrueger=<andrei.krueger@cern.ch>
 akuseju=<kush.kuseju@rl.ac.uk>
 akrenek=Aleš Křenek <ljocha@ics.muni.cz>
 akrueger=<andrei.krueger@cern.ch>
 akuseju=<kush.kuseju@rl.ac.uk>

-amarasch=<alessandro.maraschini@elsagdatamat.com>
+amarasch=Alessandro Maraschini <alessandro.maraschini@elsagdatamat.com>
+maraska=Alessandro Maraschini <alessandro.maraschini@datamat.it>

 amillar=<p.millar@physics.gla.ac.uk>
 anechaev=<Andrey.Nechaevskiy@cern.ch>
 apatil=<anand.patil@dante.org.uk>
 amillar=<p.millar@physics.gla.ac.uk>
 anechaev=<Andrey.Nechaevskiy@cern.ch>
 apatil=<anand.patil@dante.org.uk>


@@ -25,7 +26,7 @@ aphipps=<alistair@epcc.ed.ac.uk>
 aretico=<antonio.retico@cern.ch>
 asaroka=<a.soroko1@physics.ox.ac.uk>
 auzhinsk=<Alexander.Uzhinskiy@cern.ch>
 aretico=<antonio.retico@cern.ch>
 asaroka=<a.soroko1@physics.ox.ac.uk>
 auzhinsk=<Alexander.Uzhinskiy@cern.ch>

-avellino=<giuseppe.avellino@datamat.it>
+avellino=Giuseppe Avellino <giuseppe.avellino@datamat.it>

 awilson=<a.j.wilson@rl.ac.uk>
 badino=<paolo.badino@cern.ch>
 baud=<Jean-Philippe.Baud@cern.ch>
 awilson=<a.j.wilson@rl.ac.uk>
 badino=<paolo.badino@cern.ch>
 baud=<Jean-Philippe.Baud@cern.ch>


@@ -51,7 +52,7 @@ dhsmith=<David.Smith@cern.ch>
 diana=<diana.bosio@cern.ch>
 digamber=<digamber@mail.cern.ch>
 digirola=<alessandro.di.girolamo@cern.ch>
 diana=<diana.bosio@cern.ch>
 digamber=<digamber@mail.cern.ch>
 digirola=<alessandro.di.girolamo@cern.ch>

-digiusto=<cinzia.digiusto@cnaf.infn.it>
+digiusto=Cinzia Di Giusto <cinzia.digiusto@cnaf.infn.it>

 dimeglio=Alberto Di Meglio <alberto.di.meglio@cern.ch>
 dkouril=Daniel Kouřil <kouril@ics.muni.cz>
 dpiparo=<Danilo.Piparo@cern.ch>
 dimeglio=Alberto Di Meglio <alberto.di.meglio@cern.ch>
 dkouril=Daniel Kouřil <kouril@ics.muni.cz>
 dpiparo=<Danilo.Piparo@cern.ch>


@@ -215,3 +216,4 @@ dqing=Di Qing <Di.Qing@cern.ch>
 sli=Liudmila Stepanova <sli@inr.ru>
 ssayzhen=Sofia Sayzhenkova <ssayzhen@cern.ch>
 klopov=Nikolai Klopov <Nikolai.Klopov@cern.ch>
 sli=Liudmila Stepanova <sli@inr.ru>
 ssayzhen=Sofia Sayzhenkova <ssayzhen@cern.ch>
 klopov=Nikolai Klopov <Nikolai.Klopov@cern.ch>

+mpoul=Marcel Poul <marcel.poul@cern.ch>

diff --git a/cvs2git-inc.sh b/cvs2git-inc.sh
index 2fdde39..92cf385 100755 (executable)
--- a/cvs2git-inc.sh
+++ b/cvs2git-inc.sh
@@ -29,51 +29,59 @@ if [ -z "$NO_RSYNC" ]; then
        ## sync fetched CVS repo to one-module CVS repo
        #rsync --archive --verbose jra1mw.cvs/ jra1mw-cvssync.cvs/jra1mw/
 
        ## sync fetched CVS repo to one-module CVS repo
        #rsync --archive --verbose jra1mw.cvs/ jra1mw-cvssync.cvs/jra1mw/
 

-       ./cvssuck.sh
+       SKIP_OLD=1 ./cvssuck.sh

 
        # import!
 
        # import!

-       [ -d "jra1mw-cvssync.git/.git" ] || (echo "First run! Initial cvs2svn import must be done manually (although 'git cvsimport' will import something too)." && exit 1)
+       if [ ! -d "jra1mw-cvssync-origin.git/refs" ]; then
+               echo "First run! Initial cvs2svn import must be done manually (although 'git cvsimport' will import something too)."
+               exit 1
+       fi
+
+       # 1) odlifrovat wms-utils a lb.nagios
+       # 2) cp -rp CVSROOT ..
+       ...
+

        unset CVSROOT
        echo "git cvsimport..."
        unset CVSROOT
        echo "git cvsimport..."

-       git cvsimport -d `pwd`/jra1mw-cvssync.cvs -C jra1mw-cvssync.git -a -k -z30 -A authors.txt jra1mw
+       git cvsimport -d `pwd`/jra1mw-cvssync.cvs -C jra1mw-cvssync-incremental.git -a -k -z30 -A authors.txt jra1mw
+
+       # 3) vrátit wms-utils a lb.nagios
+       ...

 fi
 
 # firsttime setup for incremental sync
 if [ ! -d "jra1mw-transfer/.git" ]; then
 fi
 
 # firsttime setup for incremental sync
 if [ ! -d "jra1mw-transfer/.git" ]; then

-       echo "jra1mw git repo for sync from LCG CVS." > jra1mw-cvssync.git/.git/description
+       echo "jra1mw git repo for sync from LCG CVS." > jra1mw-cvssync-incremental.git/.git/description

 
        git clone /var/lib/git/jra1mw.git jra1mw-transfer
        cd jra1mw-transfer
 
        git clone /var/lib/git/jra1mw.git jra1mw-transfer
        cd jra1mw-transfer

-       git remote add cvssync ../jra1mw-cvssync.git
+       git remote add cvssync ../jra1mw-cvssync-incremental.git

        git fetch cvssync
        git fetch cvssync

-       for b in branch_RC31_3 branch_2_0 branch_2_1 branch_workflow branch_3_0; do
+       for b in branch_RC31_3 branch_2_0 branch_2_1 branch_workflow branch_3_0 branch_3_0_job_summaries michal_Torque master; do

                echo $b
                echo $b

-               git checkout -b $b origin/$b || break
-               #zadat tag do skriptu!
-               git log -n 1 cvssync/$b
+               git checkout -b local_${b} origin/$b || break
+               git tag -a -f -m"$b" lastsync_${b} cvssync/$b

        done
        done

-       git checkout master

        cd -
 fi
 
 cd jra1mw-transfer
 git fetch cvssync
 
        cd -
 fi
 
 cd jra1mw-transfer
 git fetch cvssync
 

-echo "\
-branch_RC31_3   4316f8ac93d4cfa61b471676c2f81e70f62f1b69
-branch_2_0      385a0a242b5e4666192f1198df92d7d451c79164
-branch_2_1      6ed42184743a87910afc8c720509003301ec6c17
-branch_workflow a0a362418b99167f40d1328ea8a934b147372329
-branch_3_0     a83b40bd71315193486807eee5d89f5c0e052497
-master          7d6f9aa03afaf70dfb6685246940348662eca988" | while read branch start; do
-       echo "$start..cvssync/$branch"
-       git checkout $branch || break
-       cl=`git log --format='%ct %H' $start..cvssync/$branch -- | grep -v '\(e6919c\|1f39df\|1f39df\)' | sort -n | cut -f2 -d' '`
+for branch in branch_RC31_3 branch_2_0 branch_2_1 branch_workflow branch_3_0 branch_3_0_job_summaries michal_Torque master; do
+       echo "lastsync_${branch}..cvssync/$branch"
+       git checkout local_${branch} || exit 1
+       cl=`git log --format='%ct %H' lastsync_${branch}..cvssync/$branch -- | sort -n | cut -f2 -d' '`
+       echo $cl

        for c in $cl; do
        for c in $cl; do

-               git cherry-pick $c
+               git cherry-pick $c || exit 1

        done
        done

-done

 
 

-echo "Really push? (CTRL-C for quit)"
-read
-git push
+       if test -n "$cl"; then
+               git tag -a -f -m"$branch" lastsync_${branch} cvssync/$branch
+               echo "Really push $branch? (CTRL-C for quit)"
+               read
+               git push origin local_${branch}:${branch}
+               echo
+       fi
+done

diff --git a/cvs2git.options b/cvs2git.options
index 499201f..97cfcfc 100644 (file)
--- a/cvs2git.options
+++ b/cvs2git.options
@@ -257,8 +257,8 @@ ctx.decode_apple_single = False
 
 # This option can be set to the name of a filename to which are stored
 # statistics and conversion decisions about the CVS symbols.
 
 # This option can be set to the name of a filename to which are stored
 # statistics and conversion decisions about the CVS symbols.

-ctx.symbol_info_filename = None
-#ctx.symbol_info_filename = 'symbol-info.txt'
+#ctx.symbol_info_filename = None
+ctx.symbol_info_filename = 'symbol-info.txt'

 
 # cvs2svn uses "symbol strategy rules" to help decide how to handle
 # CVS symbols.  The rules in a project's symbol_strategy_rules are
 
 # cvs2svn uses "symbol strategy rules" to help decide how to handle
 # CVS symbols.  The rules in a project's symbol_strategy_rules are


@@ -310,7 +310,7 @@ global_symbol_strategy_rules = [
 
     # To force all symbols matching a regular expression to be
     # excluded from the conversion, add rules like the following:
 
     # To force all symbols matching a regular expression to be
     # excluded from the conversion, add rules like the following:

-    ExcludeRegexpStrategyRule(r'^(x|y|initial|import)$'),
+    ExcludeRegexpStrategyRule(r'^(x|y|initial|import|gridsite-core_B_.*|glite-core_B_.*|glite-deployment-lb_B_.*|glite-(lb|jp|security|wms-utils).*_B_.*)$'),

 
     # Sometimes people use "cvs import" to get their own source code
     # into CVS.  This practice creates a vendor branch 1.1.1 and
 
     # Sometimes people use "cvs import" to get their own source code
     # into CVS.  This practice creates a vendor branch 1.1.1 and


@@ -525,6 +525,8 @@ author_transforms={
     'akrueger' : "<andrei.krueger@cern.ch>",
     'akuseju' : "<kush.kuseju@rl.ac.uk>",
     'amarasch' : "<alessandro.maraschini@elsagdatamat.com>",
     'akrueger' : "<andrei.krueger@cern.ch>",
     'akuseju' : "<kush.kuseju@rl.ac.uk>",
     'amarasch' : "<alessandro.maraschini@elsagdatamat.com>",

+    'amarasch' : "Alessandro Maraschini <alessandro.maraschini@elsagdatamat.com",
+    'maraska' : "Alessandro Maraschini <alessandro.maraschini@datamat.it>",

     'amillar' : "<p.millar@physics.gla.ac.uk>",
     'anechaev' : "<Andrey.Nechaevskiy@cern.ch>",
     'apatil' : "<anand.patil@dante.org.uk>",
     'amillar' : "<p.millar@physics.gla.ac.uk>",
     'anechaev' : "<Andrey.Nechaevskiy@cern.ch>",
     'apatil' : "<anand.patil@dante.org.uk>",


@@ -533,7 +535,7 @@ author_transforms={
     'aretico' : "<antonio.retico@cern.ch>",
     'asaroka' : "<a.soroko1@physics.ox.ac.uk>",
     'auzhinsk' : "<Alexander.Uzhinskiy@cern.ch>",
     'aretico' : "<antonio.retico@cern.ch>",
     'asaroka' : "<a.soroko1@physics.ox.ac.uk>",
     'auzhinsk' : "<Alexander.Uzhinskiy@cern.ch>",

-    'avellino' : "<giuseppe.avellino@datamat.it>",
+    'avellino' : "Giuseppe Avellino <giuseppe.avellino@datamat.it>",

     'awilson' : "<a.j.wilson@rl.ac.uk>",
     'badino' : "<paolo.badino@cern.ch>",
     'baud' : "<Jean-Philippe.Baud@cern.ch>",
     'awilson' : "<a.j.wilson@rl.ac.uk>",
     'badino' : "<paolo.badino@cern.ch>",
     'baud' : "<Jean-Philippe.Baud@cern.ch>",


@@ -559,7 +561,7 @@ author_transforms={
     'diana' : "<diana.bosio@cern.ch>",
     'digamber' : "<digamber@mail.cern.ch>",
     'digirola' : "<alessandro.di.girolamo@cern.ch>",
     'diana' : "<diana.bosio@cern.ch>",
     'digamber' : "<digamber@mail.cern.ch>",
     'digirola' : "<alessandro.di.girolamo@cern.ch>",

-    'digiusto' : "<cinzia.digiusto@cnaf.infn.it>",
+    'digiusto' : "Cinzia Di Giusto <cinzia.digiusto@cnaf.infn.it>",

     'dimeglio' : "Alberto Di Meglio <alberto.di.meglio@cern.ch>",
     'dkouril' : "Daniel Kouřil <kouril@ics.muni.cz>",
     'dpiparo' : "<Danilo.Piparo@cern.ch>",
     'dimeglio' : "Alberto Di Meglio <alberto.di.meglio@cern.ch>",
     'dkouril' : "Daniel Kouřil <kouril@ics.muni.cz>",
     'dpiparo' : "<Danilo.Piparo@cern.ch>",


@@ -723,6 +725,7 @@ author_transforms={
     'sli' : "Liudmila Stepanova <sli@inr.ru>",
     'ssayzhen' : "Sofia Sayzhenkova <ssayzhen@cern.ch>",
     'klopov' : "Nikolai Klopov <Nikolai.Klopov@cern.ch>",
     'sli' : "Liudmila Stepanova <sli@inr.ru>",
     'ssayzhen' : "Sofia Sayzhenkova <ssayzhen@cern.ch>",
     'klopov' : "Nikolai Klopov <Nikolai.Klopov@cern.ch>",

+    'mpoul' : "Marcel Poul <marcel.poul@cern.ch>",

   
      # This one will be used for commits for which CVS doesn't record
      # the original author, as explained above.
   
      # This one will be used for commits for which CVS doesn't record
      # the original author, as explained above.


@@ -815,5 +818,6 @@ run_options.set_project(
     # Exclude paths from the conversion. Should be relative to
     # repository path and use forward slashes:
     #exclude_paths=['file-to-exclude.txt,v', 'dir/to/exclude'],
     # Exclude paths from the conversion. Should be relative to
     # repository path and use forward slashes:
     #exclude_paths=['file-to-exclude.txt,v', 'dir/to/exclude'],

+    exclude_paths=['CVSROOT'],

     )
 
     )
 

diff --git a/cvs2git.sh b/cvs2git.sh
index 9c499e8..cca4220 100755 (executable)
--- a/cvs2git.sh
+++ b/cvs2git.sh
@@ -1,15 +1,39 @@
 #! /bin/bash
 
 #! /bin/bash
 

-svn co --username=guest --password="" http://cvs2svn.tigris.org/svn/cvs2svn/trunk cvs2svn-trunk
-
-vim jra1mw.cvs/CVSROOT/config
+# poprve:
+#svn co --username=guest --password="" http://cvs2svn.tigris.org/svn/cvs2svn/trunk cvs2svn-trunk
+#cp cvs2svn-trunk/cvs2git-example.options cvs2git.options
+#vim cvs2git.options
+#vim authors.txt
+
+# cvssuck nebo rsync...
+#...
+#vim jra1mw-cvssync.cvs/jra1mw/CVSROOT/config

 #už v sync: rm -fv CVSROOT/*,v CVSROOT/.cvsignore,v
 #už v sync: rm -fv CVSROOT/*,v CVSROOT/.cvsignore,v

-..  cp cvs2svn-trunk/cvs2git-example.options cvs2git.options
-... vim cvs2git.options
+./cvssuck.sh
+
+# ještě sloučit moduly
+##export CVSROOT=/tmp/root.cvs
+##rm -rf /tmp/root.cvs
+##mkdir $CVSROOT
+##cvs init
+##cd jra1mw-cvssync.cvs/jra1mw
+##cvs import -I CVSROOT -m"Initial import." jra1mw x y
+##mv $CVSROOT/CVSROOT .
+##rm -rf /tmp/root.cvs
+##unset CVSROOT
+##cd ..
+##ln -s jra1mw-cvssync.cvs/jra1mw jra1mw.cvs
+(cd jra1mw-cvssync.cvs; tar xzf jra1mw-cvsroot.tgz)
+
+# radsi:
+unset CVSROOT
+

 cvs2svn-trunk/cvs2git --options=cvs2git.options
 
 cvs2svn-trunk/cvs2git --options=cvs2git.options
 

-mkdir jra1mw.git
-cd jra1mw.git
+rm -rf jra1mw-cvssync-origin.git
+mkdir jra1mw-cvssync-origin.git
+cd jra1mw-cvssync-origin.git

 git init --shared --bare
 echo "jra1mw project from LCG CVS." > description
 cat ../1blob ../2dump | git fast-import
 git init --shared --bare
 echo "jra1mw project from LCG CVS." > description
 cat ../1blob ../2dump | git fast-import


@@ -17,6 +41,35 @@ cat ../1blob ../2dump | git fast-import
 cd -
 rm -fv 1blob 2dump
 
 cd -
 rm -fv 1blob 2dump
 

+# opravy historie jsou potreba pouze, pokud chcem umet cely strom rebazovat (pak je potreba smazat prazdne komity a doplnit prazdne zpravy)
+#... viz prikazy za 'exit 0'
+
+# cleanup
+cd jra1mw-cvssync-origin.git
+git reflog expire --expire=0 --all
+git repack -ad
+git prune
+git fsck --strict
+cd -
+
+# kopírování
+#su
+#cd /var/lib/git
+#rm -fv jra1mw.git
+...
+git clone --bare jra1mw-cvssync-origin.git jra1mw.git
+cd jra1mw.git
+git config core.sharedrepository 1
+echo "jra1mw project from LCG CVS." > description
+find . -type d -exec chmod g+sx {} \;
+find . -exec chmod g+w {} \;
+mv ./hooks/post-update.sample ./hooks/post-update
+git remote rm origin
+./hooks/post-update
+chown -R root:users .
+
+exit 0
+

 # ==== repairs and module moves ====
 
 #org.glite.myproxy-config      org.glite.px.myproxy-config
 # ==== repairs and module moves ====
 
 #org.glite.myproxy-config      org.glite.px.myproxy-config


@@ -30,14 +83,14 @@ rm -fv 1blob 2dump
 git show ':/^\[no ' >> ../squash-msg.txt
 
 # empty commit messages
 git show ':/^\[no ' >> ../squash-msg.txt
 
 # empty commit messages

-git log | grep -B4 'empty log message' | grep commit | cut -f2 -d' ' > revs1
+git log --all | grep -B4 'empty log message' | grep commit | cut -f2 -d' ' | grep -v ^$ > revs1

 # empty commits
 # empty commits

-git rev-list HEAD | while read c; do [ -n "$(git diff-tree --root $c)" ] || echo $c; done > revs2
+git rev-list --all | while read c; do [ -n "$(git diff-tree --root $c)" ] || echo $c; done > revs2

 
 git filter-branch \
        --msg-filter 'if grep -q "$GIT_COMMIT" '"$(pwd)/"revs1'; then echo "cvs2git: empty log message"; else cat; fi' \
        --commit-filter 'if grep -q "$GIT_COMMIT" '"$(pwd)/"revs2'; then skip_commit "$@"; else git commit-tree "$@"; fi' \
 
 git filter-branch \
        --msg-filter 'if grep -q "$GIT_COMMIT" '"$(pwd)/"revs1'; then echo "cvs2git: empty log message"; else cat; fi' \
        --commit-filter 'if grep -q "$GIT_COMMIT" '"$(pwd)/"revs2'; then skip_commit "$@"; else git commit-tree "$@"; fi' \

--f HEAD
+-f -- --all

 rm -f revs1 revs2
 
 cd ..
 rm -f revs1 revs2
 
 cd ..

diff --git a/cvssuck.sh b/cvssuck.sh
index abb6164..89d22f2 100755 (executable)
--- a/cvssuck.sh
+++ b/cvssuck.sh
@@ -1,4 +1,27 @@
 #! /bin/sh
 #! /bin/sh

-for module in org.glite.testsuites.ctb/LB org.glite.deployment.jpis org.glite.deployment.jpps org.glite.deployment.lb org.glite.jobid org.glite.jobid.api-c org.glite.jobid.api-cpp org.glite.jobid.api-java org.glite.jp org.glite.jp.client org.glite.jp.common org.glite.jp.doc org.glite.jp.index org.glite.jp.primary org.glite.jp.server-common org.glite.jp.ws-interface org.glite.lb org.glite.lb.client org.glite.lb.client-interface org.glite.lb.client-java org.glite.lb.common org.glite.lb.doc org.glite.lb.glite-LB org.glite.lb.harvester org.glite.lbjp-common org.glite.lbjp-common.db org.glite.lbjp-common.gsoap-plugin org.glite.lbjp-common.gss org.glite.lbjp-common.jp-interface org.glite.lbjp-common.log org.glite.lbjp-common.maildir org.glite.lbjp-common.server-bones org.glite.lbjp-common.trio org.glite.lbjp-utils.db org.glite.lbjp-utils.jobid org.glite.lbjp-utils.maildir org.glite.lbjp-utils.server-bones org.glite.lbjp-utils.trio org.glite.lb.logger org.glite.lb.logger-msg org.glite.lb.proxy org.glite.lb.server org.glite.lb.server-bones org.glite.lb.state-machine org.glite.lb.types org.glite.lb.utils org.glite.lb-utils org.glite.lb-utils.context org.glite.lb-utils.db org.glite.lb-utils.jobid org.glite.lb-utils.server-bones org.glite.lb-utils.trio org.glite.lb.ws-interface org.glite.lb.ws-test org.glite.lb.yaim org.glite.lb.emi-lb org.glite.myproxy-config org.glite.px org.glite.px.glite-PX org.glite.px.myproxy-config org.glite.px.myproxy-yaim org.glite.px.proxyrenewal org.glite.px.emi-px org.glite.security.gsoap-plugin org.glite.security.gss org.glite.security.proxyrenewal org.glite.testsuite.ctb org.glite.yaim.lb org.glite.yaim.myproxy org.gridsite.core; do
+#org.glite.px.myproxy-config
+OLD="org.glite.deployment.jpis org.glite.deployment.jpps org.glite.deployment.lb org.glite.jp org.glite.jp.client org.glite.jp.common org.glite.jp.doc org.glite.jp.index org.glite.jp.primary org.glite.jp.server-common org.glite.jp.ws-interface org.glite.lbjp-utils.jobid org.glite.lbjp-utils.maildir org.glite.lbjp-utils.server-bones org.glite.lbjp-utils.trio org.glite.lbjp-utils.db org.glite.lb.proxy org.glite.lb.server-bones org.glite.lb.utils org.glite.lb-utils org.glite.lb-utils.context org.glite.lb-utils.db org.glite.lb-utils.jobid org.glite.lb-utils.server-bones org.glite.lb-utils.trio org.glite.security.gsoap-plugin org.glite.security.gss org.glite.security.proxyrenewal org.glite.yaim.lb org.glite.yaim.myproxy org.glite.wms-utils.jobid org.glite.wms-utils.exception"
+test -z "$SKIP_OLD" || OLD=""
+
+for module in $OLD org.glite.testsuites.ctb/CANL-C org.glite.testsuites.ctb/LB org.glite.testsuites.ctb/PX org.glite.testsuites.ctb/gridsite org.glite.jobid org.glite.jobid.api-c org.glite.jobid.api-cpp org.glite.jobid.api-java  org.glite.lb org.glite.lb.client org.glite.lb.client-interface org.glite.lb.client-java org.glite.lb.common org.glite.lb.doc org.glite.lb.glite-LB org.glite.lb.harvester org.glite.lbjp-common org.glite.lbjp-common.db org.glite.lbjp-common.gsoap-plugin org.glite.lbjp-common.gss org.glite.lbjp-common.jp-interface org.glite.lbjp-common.log org.glite.lbjp-common.maildir org.glite.lbjp-common.server-bones org.glite.lbjp-common.trio org.glite.lb.logger org.glite.lb.logger-msg org.glite.lb.server org.glite.lb.state-machine org.glite.lb.types org.glite.lb.ws-interface org.glite.lb.ws-test org.glite.lb.yaim org.glite.lb.emi-lb org.glite.lb.nagios org.glite.myproxy-config org.glite.px org.glite.px.glite-PX org.glite.px.myproxy-yaim org.glite.px.proxyrenewal org.glite.px.emi-px org.gridsite.core emi.canl.canl-c; do
+       echo $module

        cvssuck/cvssuck :pserver:anonymous@jra1mw.cvs.cern.ch:/cvs/jra1mw -o jra1mw-cvssync.cvs/jra1mw/$module $module
        cvssuck/cvssuck :pserver:anonymous@jra1mw.cvs.cern.ch:/cvs/jra1mw -o jra1mw-cvssync.cvs/jra1mw/$module $module

+       sleep 0.5

 done
 done

+rm -rf jra1mw-cvssync.cvs/jra1mw/org.glite.px.myproxy-config/org.glite.security.voms-api/.git
+rm -rf jra1mw-cvssync.cvs/jra1mw/org.glite.px.myproxy-config/org.glite.security.voms-api-cpp/.git
+
+exit $?
+
+# =====
+
+# získání fake CVSROOT
+mkdir /tmp/mycvsroot
+export CVSROOT=/tmp/mycvsroot
+cvs init
+mkdir /tmp/mycvsmodules
+cd /tmp/mycvsmodule
+for i in `ls -1 %D`; do mkdir $i; done
+cvs import jra1mw x y
+#mv /tmp/mycvsroot/CVSROOT .../jra1mw/
+...